Buy Links & Hooks for Chains & Anchor Points

Links & Hooks

9 products

TIMCO Chain Welded Links Hot Dipped Galvanised - 6 x 42mm
TIMCO Chain Welded Links Hot Dipped Galvanised - 6 x 42mm
Pack quantity
1 Each
Price
£8.83Incl. VAT
TIMCO Quick Repair Chain Links Silver - 8mm (5pcs)
TIMCO Quick Repair Chain Links Silver - 8mm (5pcs)
Pack quantity
5 Pieces
Price
£7.19Incl. VAT
TIMCO Quick Repair Chain Links Silver - 6mm (5pcs)
TIMCO Quick Repair Chain Links Silver - 6mm (5pcs)
Pack quantity
5 Pieces
Price
£4.30Incl. VAT
TIMCO Chain Welded Links Hot Dipped Galvanised - 4 x 32mm
TIMCO Chain Welded Links Hot Dipped Galvanised - 4 x 32mm
Pack quantity
1 Each
Price
£6.26Incl. VAT
TIMCO Quick Repair Chain Links Silver - 5mm (5pcs)
TIMCO Quick Repair Chain Links Silver - 5mm (5pcs)
Pack quantity
5 Pieces
Price
£4.02Incl. VAT
TIMCO Chain Welded Links Hot Dipped Galvanised - 8 x 52mm
TIMCO Chain Welded Links Hot Dipped Galvanised - 8 x 52mm
Pack quantity
1 Each
Price
£16.94Incl. VAT
TIMCO Quick Repair Links Silver - 8mm (5pcs)
TIMCO Quick Repair Links Silver - 8mm (5pcs)
Pack quantity
5 Pieces
Price
£6.56Incl. VAT
TIMCO Quick Repair Links Silver - 6mm (10pcs)
TIMCO Quick Repair Links Silver - 6mm (10pcs)
Pack quantity
10 Pieces
Price
£7.30Incl. VAT
TIMCO Quick Repair Links Silver - 5mm (10pcs)
TIMCO Quick Repair Links Silver - 5mm (10pcs)
Pack quantity
10 Pieces
Price
£6.56Incl. VAT

Links & Hooks for Trade and DIY Use

One weak link or a poorly rated hook can cause a load to fail. That is a risk no tradesperson or site worker should take. Here you will find a solid range of chain links, heavy duty hooks, snap hooks, eye bolts, and connecting hardware. All products are suited to lifting, rigging, securing, and general load-bearing tasks. Whether you are on site, in the workshop, or doing a home project, the right link or hook is here.

Links and Hooks Built for Real Working Loads

Links and hooks look simple. But they carry serious responsibility. A chain link or lifting hook must be rated for the load it holds.

In the UK, working load limits (WLL) are a legal requirement for lifting gear. Always match the rated capacity to the actual load you are lifting or securing. Never exceed the stated working load limit on any hook or link.

This range covers the most-used types on UK trade sites and in workshops. Products are available in practical pack sizes for trade buyers and DIY users alike. Sizes range from small connecting links for light rigging to heavy duty lifting hooks for larger loads.

Important: Always check the working load limit (WLL) before use. Never use a hook or link that shows signs of wear, cracks, or deformation. Damaged hardware must be removed from service immediately.


Types of Links and Hooks Available

This collection includes quick repair links for joining chain and hot-dipped galvanised welded chain for general securing tasks. Compare the sizes, link dimensions, and intended uses below before choosing your hardware.

5mm Quick Repair Chain Links

For joining chain lengths or replacing a broken link, consider 5mm quick repair chain links. These zinc-finished carbon steel links come in a five-piece pack, with inner dimensions of 51 x 23mm. Check the chain dimensions and product specifications for compatibility before fitting.

6mm Quick Repair Chain Links

The 6mm quick repair chain links provide another size option for connecting or repairing chain. Supplied in a pack of five, each carbon steel link has a zinc finish and inner dimensions of 58 x 27mm. Choose this size only where it suits your chain and intended task.

8mm Quick Repair Chain Links

Where a larger connector is needed, 8mm quick repair chain links have inner dimensions of 74 x 34mm. This five-piece TIMCO pack is designed for joining chain lengths or repairing broken links. The carbon steel construction has a silver zinc finish.

4 x 32mm Galvanised Welded Chain

For general securing around farm gates and machinery, choose a suitable length of 4 x 32mm galvanised welded link chain. This carbon steel chain comes in a three-metre length with a hot-dipped galvanised finish. It is not suitable for overhead lifting, load binding, or towing.

6 x 42mm Galvanised Welded Chain

The 6 x 42mm galvanised welded link chain is supplied in a two-metre length. Its inner link dimensions are 42 x 12mm, with a hot-dipped galvanised finish on carbon steel. Use it for appropriate general securing tasks, not overhead lifting, load binding, or towing.

8 x 52mm Galvanised Welded Chain

For a larger welded chain option, 8 x 52mm galvanised welded link chain comes in a 1.5-metre length. The inner links measure 52 x 16mm. Like the other welded chains listed here, it is intended for suitable securing applications and must not be used for overhead lifting, load binding, or towing.


Matching the Right Hardware to Your Task

The right link or hook depends on three things. Load weight, load direction, and the environment it will work in.

Light-Duty Securing Tasks

Tying down garden equipment or securing light loads on a trailer? A snap hook or quick link with a modest WLL is enough. Zinc-plated or mild steel finishes work well for indoor or occasional outdoor use.

General Site and Workshop Use

Connecting slings, lifting gear, or workshop chains? Use screw-pin shackles or clevis hooks with safety latches. Check the rated WLL matches the heaviest load you will lift.

Heavy Lifting and Rigging

Crane lifts, engine hoists, and structural rigging need certified hardware. Use forged steel lifting hooks and rated bow shackles. All lifting gear used in the UK must carry a marked WLL and CE or UKCA marking.

Outdoor and Coastal Use

In wet, salty, or coastal environments, corrosion is a real problem. Use A4 stainless steel or hot-dipped galvanised hardware. Zinc-plated products corrode quickly in exposed outdoor conditions.

Safety Lines and Fall Arrest

For fall protection systems, only use EN-rated snap hooks and carabiners. These must meet BS EN 362 standards in the UK. Standard snap hooks are not rated for fall arrest applications.

Tie-Down and Load Securing

Ratchet straps and cargo nets need reliable end hooks. J-hooks, flat hooks, and wire hooks are common strap end fittings. Ensure the hook rating matches the strap breaking strength.


Understanding Working Load Limits

Every hook, link, and shackle has a working load limit (WLL). This is the maximum load it is rated to carry safely. Exceeding the WLL is dangerous and illegal on UK worksites.

The WLL is not the same as the breaking load. The breaking load is typically four to five times higher than the WLL. This safety factor protects against shock loads and unexpected stress.

The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) apply to all UK lifting tasks. Equipment must be marked, inspected regularly, and used within its rated limits. Keep records of inspections for all lifting accessories used on site.

UK Legal Note: Under LOLER, all lifting accessories must be visually inspected before each use. A thorough examination by a competent person is required at least every six months. This applies to hooks, shackles, slings, and all lifting links.


Material and Finish Guide for Links and Hooks

The finish you need depends on where the hardware will be used. Using the wrong material in the wrong environment shortens the working life.

Finish Best Environment Common Uses
Zinc Plated Dry, indoor areas Workshop hooks, light-duty connecting links
Hot-Dipped Galvanised Outdoor, intermittently wet Site rigging, fencing, general outdoor securing
A2 Stainless Steel Outdoor and damp conditions Marine-adjacent rigging, outdoor anchor points
A4 Stainless Steel Coastal or chemical environments Boat fittings, pool surrounds, salt-air areas
Forged Alloy Steel Heavy industrial and lifting Crane hooks, lifting shackles, rated rigging

Zinc-plated links and hooks will corrode fast in damp UK outdoor conditions. For anything exposed to weather, choose galvanised or stainless steel.


Find the Right Link or Hook for Your Job

Use the filters above to narrow by product type, material, and load rating. Check individual product pages for exact WLL ratings, chain compatibility, and certifications before ordering.

Whether you need chain links for connecting rigging, heavy duty hooks for crane and lifting work, snap hooks for securing loads, shackles for joining slings, or eye bolts for fixed anchor points, this range covers the most used links and hooks hardware for trade and DIY use across the UK. See our chains range for compatible chain products to pair with your links and hooks.


Frequently Asked Questions

What is the difference between a snap hook and a locking snap hook?

A standard snap hook has a spring-loaded gate that can open under side load. A locking snap hook has a secondary mechanism, such as a screwgate or twist-lock, to prevent accidental opening. Use locking snap hooks wherever safety is a concern, including height work and load securing.

What does WLL mean on a hook or link?

WLL stands for Working Load Limit. It is the maximum safe load the item is rated to carry in normal use. Never exceed the stated WLL. It is a legal requirement on UK worksites under LOLER.

Can I use a standard snap hook for fall arrest?

No. Standard snap hooks are not rated for fall arrest. Fall arrest applications require EN-rated connectors that meet BS EN 362. Always use certified, CE or UKCA-marked hardware for personal fall protection.

What is the difference between a bow shackle and a dee shackle?

A bow shackle has a rounded, oval body and handles multi-directional loads well. A dee shackle has a narrower, D-shaped body and is best for in-line, straight loads. Use a bow shackle when load direction may vary.

How do I know what size connecting link to use with my chain?

Match the connecting link to the wire diameter of your chain. For example, a 6mm chain needs a 6mm connecting link. Using an oversized or undersized link reduces strength and can cause failure.

How often should lifting hooks and links be inspected?

Under LOLER in the UK, lifting accessories must be inspected before every use. A formal thorough examination by a competent person is required at least every six months. Any item showing wear, cracks, or distortion must be taken out of service immediately.

Are galvanised hooks suitable for outdoor use in the UK?

Yes. Hot-dipped galvanised hooks and links are well suited to general outdoor use in the UK. For coastal or highly exposed areas, A4 stainless steel gives better corrosion resistance. Zinc-plated products should not be used outdoors in damp conditions.


Related Hardware and Fixings

Links and hooks are often used alongside other load-bearing hardware. See our chains range for rigging chain in a range of grades and sizes.

For fixed structural anchor points, see our structural fixings range.