178 products

Premium Woodscrews

- Pack quantity
- 200 Pieces
- Price
- £6.71Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £5.12Incl. VAT

- Pack quantity
- 100 Pieces
- Price
- £21.35Incl. VAT

- Pack quantity
- 100 Pieces
- Price
- £6.74Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £3.95Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £2.63Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £3.83Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £5.46Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £3.55Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £3.79Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £2.90Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £10.68Incl. VAT

- Pack quantity
- 1200 Pieces
- Price
- £20.69Incl. VAT

- Pack quantity
- 50 Pieces
- Price
- £14.06Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £4.78Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £6.70Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £4.36Incl. VAT

- Pack quantity
- 100 Pieces
- Price
- £9.35Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £6.05Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £2.96Incl. VAT

- Pack quantity
- 300 Pieces
- Price
- £20.69Incl. VAT

- Pack quantity
- 25 Pieces
- Price
- £27.86Incl. VAT

- Pack quantity
- 100 Pieces
- Price
- £5.98Incl. VAT

- Pack quantity
- 200 Pieces
- Price
- £5.98Incl. VAT
Premium Countersunk Gold Woodscrews
A complete range of premium woodscrews available in every diameter from 3mm to 8mm and in a wide selection of lengths. Stocked in the UK and available for next-day delivery to trade and self-builders nationwide.
The Right Woodscrew Diameter for Every Application
Choosing the correct diameter is just as important as choosing the correct length when selecting premium woodscrews. An undersized screw will not provide adequate holding strength in load-bearing joints; an oversized screw will split the workpiece or cause the timber to fail around the fixing. This collection covers every diameter in common use across joinery, construction, cabinetry and general woodworking, from fine 3mm screws for delicate trim work right through to heavy-duty 8mm screws for structural applications.
Every screw in this range is manufactured to consistent standards, with thread geometry and head profiles selected for reliable performance in both softwood and hardwood. Whether you are fixing skirting boards, assembling stud partitions, hanging doors or building joinery furniture, the correct diameter and length combination is available in this collection.
Explore Premium Woodscrews for Your Project
Compare these six products from our premium woodscrews collection. Follow each link for the full specification, and select the diameter, length and thread design to suit your materials and fixing requirements.
TIMCO Velocity 3.5 × 35mm Woodscrews, 200 Pack
A 3.5mm diameter screw with a PZ2 drive and a ribbed double countersunk head. Its serrated dual-angle thread and wax lubrication support installation in materials including softwood, hardwood, chipboard and MDF.
TIMCO Velocity 4.0 × 25mm Woodscrews, 200 Pack
This shorter 25mm option has a PZ2 drive, zinc and yellow finish, and a fully threaded design. Check the material thickness and required fixing depth before choosing this length.
TIMCO C2 Clamp-Fix 4.0 × 60mm Woodscrews, 200 Pack
A TX20-drive screw with C2 twin-cut technology and a partial thread designed to draw timber components together. The listed maximum clamping fixture thickness is 20mm.
TIMCO C2 Clamp-Fix 4.0 × 80mm Woodscrews, 200 Pack
An 80mm-long Clamp-Fix screw with a double countersunk head, TX20 drive and zinc and yellow finish. Its 50mm thread leaves a partial-thread section for clamping timber-to-timber joints.
TIMCO C2 Strong-Fix 5.0 × 75mm Woodscrews, 200 Pack
The Strong-Fix design uses a dual-angle full-thread profile for applications such as hinges and brackets. This 5.0 × 75mm option has a PZ2 drive and a C2 twin-cut point.
TIMCO C2 Clamp-Fix 8.0 × 100mm Woodscrews, 100 Pack
An 8mm-diameter Clamp-Fix screw with a TX40 drive, double countersunk head and 80mm thread length. Check the product specification and connection requirements before selecting this larger fixing.
Choosing the Correct Woodscrew Diameter
As a practical guide, the diameter of the screw shank should be approximately one-tenth of the total screw length for general woodworking applications. In practice, most joiners and carpenters work from the material being fixed: for thin sheet materials and small-section softwood, 3mm screws or 3.5mm screws are appropriate. For general internal joinery and carcass work, 4mm screws and 4.5mm screws cover the majority of requirements. For structural first-fix carpentry and external joinery, 5mm screws and 6mm screws provide the holding strength required. For the heaviest structural connections, 8mm screws deliver maximum pull-out resistance.
When fixing into end grain, always select one diameter size larger than you would use for face-grain fixing, as end-grain pull-out strength is significantly lower in most timber species. Pre-drilling a pilot hole to approximately 70% of the shank diameter will prevent splitting in both softwood and hardwood across all the gauges in this range.
Head Types and Drive Formats
Our premium woodscrews are available in the head profiles and drive formats most commonly used in UK joinery and construction. Countersunk heads are the standard choice for most applications, sitting flush with the timber surface when fully driven and allowing a clean finish with or without a wood filler plug. Raised countersunk heads are used where a decorative head is visible in the finished work. Pan heads are suited to fixing hardware, brackets and ironmongery where a flush finish is not required.
Drive formats across the range include Pozi, Torx and, on larger structural gauges, hex flange. Torx drive is increasingly specified on professional sites for its superior resistance to cam-out under high torque, particularly when driving 5mm screws, 6mm screws and 8mm screws with an impact driver into dense or knotty timber.
Thread and Point Design: Every woodscrew in our premium range features a sharp cutting point and optimised thread pitch for the diameter. Coarse threads are used on screws intended for softwood and sheet materials to maximise pull-out resistance. Finer thread pitches are available on larger diameters for use in hardwood, where a coarser thread can cause splitting or distortion of the surrounding fibre.
Coatings, Materials and Corrosion Resistance
The correct coating for a premium woodscrew depends on the application environment and the timber treatment used. Our range includes bright zinc plated screws for internal dry applications, yellow passivated screws for general construction use, and fully corrosion-resistant coatings for external joinery and applications involving treated or preservative-impregnated timber.
For external joinery, cladding, external door frames and any application where the screw will be exposed to moisture, always select a corrosion-resistant option. Bright zinc plate is not adequate for external use and will cause staining of the timber surface as the coating degrades. If you are fixing into pressure-treated or tanalised timber at any diameter from 3mm screws through to 8mm screws, select a screw with a coating rated for contact with timber preservatives.
Trade Stocked, Next-Day Delivered
JALFT supplies premium woodscrews in every diameter and length to builders, joiners, carpenters and self-builders across the UK. Every product in this range is held in our UK warehouse and available for next-day delivery on orders placed before 2pm. Products are available in trade boxes and contractor packs, with pricing structured for professional volume requirements across all gauges from 3mm screws to 8mm screws.