3 products
Paslode Fuel Cells
paslode-fuel-cells
Paslode Fuel Cells for Nailer Work
A flat fuel cell stops a job dead. That costs time and money on site. Here you will find genuine Paslode fuel cells for first fix and second fix nailers. It includes the Paslode Series-i fuel cell, Paslode mini fuel cell, and the standard IM350 cell. All cells contain Paslode's patented gas and lubricant formula. They work across a wide temperature range. They keep your nailer firing cleanly. Stock up and never run out mid-job again.
Why Genuine Paslode Gas Fuel Cells Matter
Paslode cordless nailers run on a gas and ignition system. The fuel cell powers each shot. Without a working fuel cell, the tool will not fire.
Genuine Paslode fuel cells contain a patented lubricant blend. This lubricant cleans the tool with every shot. It reduces misfires and prolongs the life of the nailer. Non-genuine or low-quality cells do not carry this formula. Over time, using the wrong cell can damage seals and valves.
Paslode fuel cells use a patented dosing valve. This valve adjusts the amount of gas released per shot. It compensates for changes in ambient temperature. You get consistent drive depth in cold or warm conditions.
Good to know: Paslode fuel cells work in temperatures from -15°C to +49°C. In very cold weather, warm the cell in your pocket before use. This helps the gas vaporise properly and keeps your tool firing.
Types of Paslode Fuel Cell
Paslode makes three main fuel cell types. Each is tool-specific. Using the wrong cell can affect performance or damage your tool. Match the cell to your nailer model before ordering.
Paslode Series-i Fuel Cell (80ml)
The Series-i fuel cell is for Paslode's newer cordless framing nailers. It fits the IM360Ci, 360Xi, IM90i, PPNXi, and PPN35Ci models. The 80ml cell gives up to 1,250 shots at optimum temperature. It has a self-locating loading system. You do not need to manually set it. The blue or clear valve identifies this cell type. It is the most commonly used cell for first fix framing work.
Paslode IM350 Standard Fuel Cell (60ml)
The standard pink valve fuel cell fits the IM350 and IM350+ framing nailers. These are the older generation of Paslode cordless first fix tools. The 60ml cell provides up to 1,100 shots at 0°C. At warmer temperatures, output can reach up to 1,250 shots. The pink valve colour helps you identify this cell at a glance. It is sold in packs of two for trade convenience.
Paslode Mini Fuel Cell (30ml)
The Paslode mini fuel cell is for second fix and finishing nailers. It fits the IM65, IM65A, IM50, and IM200 stapler. The 30ml mini cell gives around 1,000 shots per cell. The yellow valve identifies this smaller format cell. It is ideal for architrave, skirting, beading, and trim work. Mini cells are also sold in packs of two.
Paslode Fuel Cell Refill Packs
All Paslode fuel cells are sold in single or twin packs. Twin packs give better value for busy tradespeople. A twin pack of Series-i or IM350 cells gives you up to 2,500 shots. A twin pack of mini cells gives around 2,000 shots total. Keep a spare cell in your bag. It means no downtime when one runs out. Paslode fuel cell refill packs are the most cost-effective way to stock up.
Paslode Fuel Cell Compatibility Guide
Use this table to match your Paslode tool to the correct fuel cell. Always verify against your tool's manual before ordering.
| Paslode Tool Model | Fuel Cell Type | Cell Size | Shots Per Cell (Approx) |
|---|---|---|---|
| IM360Ci / 360Xi / IM90i / PPNXi / PPN35Ci | Series-i Fuel Cell | 80ml | Up to 1,250 |
| IM350 / IM350+ | Standard Fuel Cell (Pink) | 60ml | Up to 1,100 at 0°C |
| IM65 / IM65A / IM50 / IM200 Stapler | Mini Fuel Cell (Yellow) | 30ml | Around 1,000 |
The Series-i cell and the IM350 standard cell are not interchangeable. The valve sizes and dosing systems are different. Always check the valve colour and tool model before fitting.
How to Use and Store Paslode Fuel Cells
Paslode fuel cells are simple to fit. They slide into the magazine or handle area of the tool. The self-locating valve on Series-i cells clicks into place automatically. On older IM350 tools, align the cell valve with the tool inlet before pressing in.
When a fuel cell runs out, the tool will fire with a weaker drive or stop firing. Do not try to refill a used Paslode fuel cell. They are not designed to be topped up. Attempting to refill them is unsafe and voids any product warranty.
Storage tip: Store unused Paslode fuel cells at room temperature. Avoid storing them in direct sunlight or near heat sources. Do not store them in a van cab or boot in summer months. Excessive heat can damage the valve and affect cell performance. The recommended storage temperature is between 5°C and 40°C.
Remove the fuel cell from your Paslode nailer when storing the tool overnight. This prevents gas from slowly leaking out and keeps the tool in better condition. It also reduces the risk of accidental ignition when the tool is not in use.
Using Paslode Fuel Cells in Cold UK Weather
Cold weather affects how Paslode fuel cells perform. As the temperature drops, the gas inside the cell condenses. This reduces how much gas is dispensed per shot. The result is weaker drive depth or intermittent misfires.
Paslode fuel cells are rated to work from -15°C upwards. However, at temperatures below 5°C, you may notice reduced output. Here is how to get the best from your cell in cold conditions:
Warm the Cell Before Use
Place the fuel cell in an inside pocket for 10 to 15 minutes before fitting it. Body heat is enough to warm the gas and restore normal output. Never use a flame or heater to warm a fuel cell. This is dangerous.
Keep a Spare Cell Warm
Carry a second fuel cell in your coat pocket while working. When one cell runs low or gets cold, swap to the warm spare. This prevents output loss and keeps your tool working through a cold day.
Prime the Tool After Fitting
After fitting a cold or new cell, press the nose of the tool down twice. This primes the fuel injection system. It helps the tool get up to temperature before you start driving nails.
Count Shots in Cold Conditions
In cold weather, you may get fewer shots per cell than the stated maximum. Do not assume the cell is empty if the tool misfires once or twice. Warm the cell first and try again before fitting a new one.
Pair Your Fuel Cells With the Right Paslode Nails
A fuel cell alone will not complete the job. You also need the correct nails for your tool. Paslode nails are collated and tool-specific. Using the wrong nails can cause jams and damage the magazine.
For first fix framing work with the IM360Ci or 360Xi, you need 34-degree round head nails. For the IM350 or IM350+, you need 34-degree clipped or D-head nails in 50mm to 90mm lengths. For second fix finishing work with the IM65 or IM65A, you need 16-gauge brads in lengths from 25mm to 65mm.
See our full range of Paslode nails to find the right fastener for your tool and material.
Frequently Asked Questions
What is a Paslode fuel cell?
A Paslode fuel cell is a pressurised gas canister that powers Paslode cordless nailers. The gas ignites inside the tool to drive each nail. The cell also contains a patented lubricant that cleans the tool with every shot. Without a working fuel cell, the nailer will not fire.
How many shots does a Paslode fuel cell give?
It depends on the cell type. The Series-i cell (80ml) gives up to 1,250 shots at optimum temperature. The IM350 standard cell (60ml) gives up to 1,100 shots at 0°C. The mini cell (30ml) for finishing nailers gives around 1,000 shots. Cold weather reduces shot count. Warm the cell to restore full output.
Can I refill a Paslode fuel cell?
No. Paslode fuel cells are single-use sealed canisters. They are not designed to be refilled or topped up. Attempting to refill them is unsafe and can damage the valve. When the cell is empty, fit a new one from a genuine pack.
What is the difference between the Series-i and IM350 fuel cell?
The Paslode Series-i fuel cell is 80ml and fits newer tools like the IM360Ci and 360Xi. The IM350 standard cell is 60ml and fits older framing nailers like the IM350 and IM350+. The two cells have different valve sizes and dosing systems. They are not interchangeable. Always check your tool model before ordering.
What is the Paslode mini fuel cell used for?
The Paslode mini fuel cell is for second fix and finishing nailers. It fits the IM65, IM65A, IM50, and IM200 stapler. It is a 30ml cell with a yellow valve. It gives around 1,000 shots and is ideal for skirting, architrave, and trim work.
Why is my Paslode nailer misfiring with a new fuel cell?
The most common cause is a cold fuel cell. In temperatures below 5°C, the gas condenses and dispenses less per shot. Warm the cell in your pocket for 10 to 15 minutes, then prime the tool by pressing the nose twice. If the issue continues, the tool may need cleaning. Check the ignition module and clean the combustion chamber.
How should I dispose of an empty Paslode fuel cell?
Empty Paslode fuel cells are pressurised aerosol containers. Do not puncture or crush them. Follow your local council's guidelines for aerosol disposal. Many councils accept empty aerosols in household recycling bins. Never throw them onto a fire or into general waste skips.
Related Paslode Accessories
Fuel cells work best alongside regular tool maintenance. See our Paslode accessories range for cleaning kits, oil, and spare parts.
If you are looking for nails to use with your fuel cells, visit our Paslode nails page for first fix and second fix options.