26 products
Resin & Accessories
resin-accessories-1
TIMCO Chemical Anchor Studs Hot Dipped Galvanised - M12 x 160 (10pcs)
- Pack quantity
- 10 Pieces
- Price
- £12.36Incl. VAT
TIMCO Chemical Anchor Wire Hole Cleaning Brushes - 22mm (10pcs)
- Pack quantity
- 10 Pieces
- Price
- £31.48Incl. VAT
TIMCO Chemical Anchor Studs Silver - M16 x 190 (10pcs)
- Pack quantity
- 10 Pieces
- Price
- £15.07Incl. VAT
TIMCO Vinylester Styrene Free Chemical Anchor Resins - 410ml
- Pack quantity
- 1 Each
- Price
- £11.28Incl. VAT
TIMCO Chemical Anchor Wire Hole Cleaning Brushes - 15mm (10pcs)
- Pack quantity
- 10 Pieces
- Price
- £30.05Incl. VAT
TIMCO Chemical Anchor Wire Hole Cleaning Brushes - 13mm (10pcs)
- Pack quantity
- 10 Pieces
- Price
- £27.59Incl. VAT
TIMCO Chemical Anchor Studs Hot Dipped Galvanised - M20 x 260 (4pcs)
- Pack quantity
- 4 Pieces
- Price
- £19.52Incl. VAT
TIMCO Chemical Anchor Studs Hot Dipped Galvanised - M16 x 190 (10pcs)
- Pack quantity
- 10 Pieces
- Price
- £22.58Incl. VAT
TIMCO Chemical Anchor Studs Hot Dipped Galvanised - M8 x 110 (10pcs)
- Pack quantity
- 10 Pieces
- Price
- £5.08Incl. VAT
TIMCO Chemical Anchor Studs Hot Dipped Galvanised - M10 x 130 (10pcs)
- Pack quantity
- 10 Pieces
- Price
- £7.18Incl. VAT
TIMCO Vinylester Styrene Free Chemical Anchor Resins - 300ml
- Pack quantity
- 1 Each
- Price
- £9.80Incl. VAT
TIMCO Chemical Anchor Resin Plastic Sleeves - 16 x 85 (100pcs)
- Pack quantity
- 100 Pieces
- Price
- £43.98Incl. VAT
Resin & Accessories for Strong, Safe Fixings
Need a fixing that will not pull out? Chemical resin is a strong way to hold a stud in concrete or brick. Here you will find resin and accessories from TIMCO. The range has anchor resins, studs, sleeves, hole brushes, nozzles, a resin gun, and a blow out pump. You can build your own resin accessories kit from one page. It suits trade and home jobs. Order by 2 pm for next day delivery.
How Resin Anchoring Works
A resin anchor has two main parts. One is the resin. The other is a threaded stud. You fill a clean hole with resin. Then you twist the stud into it.
The resin sets hard around the stud. It fills the small gaps in the hole. This gives a tight grip. It also spreads the load into the wall or floor.
Resin does not push outward like some fixings do. This makes it a good pick for jobs near an edge. It is also a smart choice when you need a strong hold in concrete, brick, or block.
Quick tip: Always clean the hole first. Brush it. Blow out the dust. Then brush and blow again. A dirty hole can weaken the bond. Check the pack for the right hole size.
What Is in Our Resin & Accessories Range
Each part has its own job. Here is a simple guide to what you can buy.
Polyester Chemical Anchor Resins
Polyester resin suits many everyday fixings. It comes in 300ml and 410ml cartridges. A styrene free polyester resin is also in the range.
Vinylester Chemical Anchor Resins
Vinylester resin is often used for tougher jobs. It is styrene free. Pick from 300ml and 410ml cartridges.
Chemical Anchor Studs
Studs come in M8, M10, M12, M16, and M20. Choose silver or hot dipped galvanised. Pack sizes are 2, 4, and 10 pieces.
Resin Plastic Sleeves
Sleeves keep the resin in place in hollow brick and block. They come in 16 x 85 and 16 x 130. Each pack holds 100 pieces.
Wire Hole Cleaning Brushes
These brushes scrub dust out of the hole. Choose from 13mm, 15mm, and 22mm sizes. Each pack has 10 brushes.
Resin Gun, Pump and Nozzles
The heavy duty 8 inch resin gun pushes resin out with ease. The blow out pump clears dust from the hole. Grip & Fill nozzles come in a pack of 6.
Build Your Own Resin Accessories Kit
A good resin accessories kit has more than resin. You pick each part to match your job. This helps you buy only what you need.
| Part | What It Does | Why You Need It |
|---|---|---|
| Resin cartridge | Bonds the stud to the wall or floor | It holds the stud in place |
| Resin gun | Pushes the resin out of the cartridge | It gives a steady flow |
| Nozzle | Guides the resin into the hole | It keeps the job neat |
| Hole brush | Scrubs dust from the hole | Dust weakens the bond |
| Blow out pump | Blows loose dust out of the hole | A clean hole grips better |
| Plastic sleeve | Holds the resin in hollow brick | It stops resin from filling gaps |
| Threaded stud | Takes the load | Pick the size and finish for your job |
Always check that your nozzle fits your cartridge before you buy.
Picking the Right Resin and Accessories
Think about the wall, the weather, and the weight. Then choose your parts.
Solid Concrete or Brick
Use a resin cartridge and a stud. Clean the hole well. No sleeve is needed.
Hollow Block or Perforated Brick
Add a plastic sleeve. It holds the resin where the wall has gaps.
Outdoor and Damp Areas
Choose hot dipped galvanised studs. They are made to cope with wet weather better than zinc studs.
Indoor and Dry Areas
Silver zinc studs work well indoors. They are a good value pick for dry spaces.
Bigger Jobs
Heavy items need a bigger stud, like M16 or M20. Always check the pack for hole size and depth.
Low Smell Choice
Pick a styrene free resin. Both polyester and vinylester styrene free options are in this range.
Looking for Epoxy Resin Wood Filler?
Many people search for epoxy resin wood filler. The resin in this range is made for anchoring studs in masonry. It is not made to fill or repair wood.
For wood repairs, see our fillers range. You can also try our wood adhesives. Always read the pack to check what a product is made for.
How to Fit a Resin Anchor
Follow these simple steps. Always read the pack for exact sizes and set times.
- Drill the hole to the size on the pack.
- Brush the hole with a wire brush.
- Blow out the dust with the pump.
- Brush and blow again until the hole is clean.
- Add a sleeve if you are fixing into hollow brick or block.
- Fill the hole with resin using the resin gun.
- Twist the stud into the hole.
- Wait for the set time. Then fit your item.
Stay safe: Wear gloves and eye protection when you work with resin. Set times change with the weather. Cold slows the set. Heat speeds it up.
Shop Resin & Accessories at JALFT
Use the filters to pick by product type, thread size, and finish. Check each product page for pack size and details before you order.
Whether you need anchor resin, studs, sleeves, brushes, or a full resin accessories kit, you can find it here. Order by 2 pm for next day delivery. Spend £75 to get free delivery. Need help? Call us on 01482 306 883.
Frequently Asked Questions
What are resin and accessories used for?
They are used to fix threaded studs into concrete, brick, and block. The resin bonds the stud in the hole. The accessories help you clean the hole and apply the resin.
What do I need in a resin accessories kit?
You need a resin cartridge, a resin gun, a nozzle, a hole brush, and a blow out pump. Add a stud for every fixing. Add plastic sleeves if the wall is hollow.
Is epoxy resin wood filler in this range?
No. This range holds chemical anchor resins for masonry fixings. For wood repairs, look at our fillers and wood adhesives.
Do I need a sleeve with resin?
You need a sleeve in hollow or perforated brick and block. It holds the resin in place. In solid concrete or brick, you can skip it.
Why do I need to clean the hole?
Dust gets in the way of the bond. Brush and blow out the hole before you add resin. A clean hole helps the resin grip the wall.
What is the difference between polyester and vinylester resin?
Both bond studs into masonry. Vinylester is often picked for tougher jobs. Check the pack to see which one suits your task.
Which stud finish is best outdoors?
Hot dipped galvanised studs are the better pick for outdoor use. Silver zinc studs are best kept indoors in dry spaces.
How long does resin take to set?
It depends on the resin and the air temperature. Cold weather takes longer. Always check the pack before you load the fixing.
Related Fixings and Tools
See our masonry and concrete fixings for more ways to fix into brick and block. For bolts and screws, see our concrete bolts and screws.
You will also need the right drill bit. Browse our masonry drill bits to drill clean holes.